I'm a robotics engineer

An engineer with too many interests. Luckily, I know how to build most of them. These days that means soft grippers, printed sensors and machines, where robotics research meets industry.

Work

Research projects, things built for fun, and things still waiting in the drawer. Most of the big ones were team efforts, so each says who did what. The patents have their own language.

SensiFlex three-finger gripper, render

SensiFlex soft grippers

Soft robotics · LITecS, UBI · started in ROBOTA-SUDOE (Interreg SUDOE)

Soft grippers that feel what they hold. A peach is delicate, and no two are the same size: a soft finger solves the first problem, a sensor inside the finger solves the second. The sensor is printed into the finger as it is made, not glued on afterwards.

  • Self-sensing
  • Designed for additive manufacturing
  • Patents pending
  • Four awards in 2026

Team: LITecS. My part: the base design of the grippers, how the sensors go into the fingers, and how the fingers talk to the actuator.

See project details
Mini arcade, assembled, blue and red printed body

Printed joystick and mini arcade

Printed sensors · Formnext demonstrator with Recreus

A joystick whose sensing elements are printed in conductive TPU, and an arcade built around it so people actually touch it.

  • Conductive TPU
  • ESP32
  • Open source

Team: mine, with help from researchers at LITecS.

See project details
The thermoelectric heat exchanger built to grow frost on demand for the PhD tests

A sensor that knows when to defrost

PhD in Mechanical Engineering · C-MAST, UBI

Fridges and cold rooms defrost on a timer, whether they need it or not. I developed a low-cost resistive sensor that detects frost, and computer vision to prove it works, so defrosting can happen only on demand.

  • Refrigeration
  • Resistive sensors
  • Computer vision
  • Thermoelectric powered

Team: my PhD, with my supervisors at C-MAST.

See project details
The monitoring station render: galvanised pole, solar panel, cameras, weather sensors and an anchor

Field monitoring stations

Agriculture · Montanha Viva and BioD'Agro

Self-sufficient sensor and weather stations with computer vision, for vineyards and mountain plants. Designed, drawn and built for life outdoors.

  • IoT and edge AI
  • Computer vision
  • Off-grid power

Team: LITecS. My part: all of the mechanical design and drawings. The team did the vision algorithms and helped build and assemble.

See project details
BELENUS pellet heater, render

BELENUS

Product development · StartUP Voucher, Startup Portugal

A pellet stove small enough for a motorhome. The trick was the burner: the flame spins in a cyclone, which keeps combustion compact. Ambitious concept, interesting results, and a lot learned about turning an idea into a product.

  • Biomass
  • Cyclone combustion
  • Startup grant

Team: three of us, colleagues and friends. My part: concept and mechanical design, shared with the other two.

See project details

About

Electromechanical engineer with a PhD in mechanical engineering. I teach at the University of Beira Interior and do research at LITecS, in C-MAST, mostly in robotics these days.

I grew up between a sculpture studio and a workshop, and I still like to make all of a thing: the part, the electronics, the box it comes in and the card inside the box.

StrengthLikes to see a thing through, from sketch to screws.
WeaknessTakes things apart to see how they work. Not all of them go back together.
StrengthHas a lot of ideas.
WeaknessCan't build them fast enough.
Martim soldering at his bench under a magnifier lamp
Night owling.
  1. 1Born
  2. 2Grew up
  3. 3Studied, stayed, work

Between the lab and the factory floor

Research produces good ideas. Industry needs things that work, can be made and can be fixed. I like working on the part in between: development.

Research

Works in the lab, once.

Development

Works every time, and can be made.

Industry

Makes it, sells it, fixes it.

What I bring to the middle

Build it

CAD, analysis, prototyping and fabrication in-house: printing, laser cutting, CNC. Prototyping is my love language.

Explain it

I have taught robotics, automation, project and refrigeration since 2017, and set up UBI's additive manufacturing course. Explaining a problem to a student, a company or an AI tool is the same skill: understand how the other side thinks.

Use what exists

Wherever the field moves, I'd rather use the new tools than be left behind. Generative design, AI, new materials: if it helps build, it's in. This website is the proof. I am no web designer.

Skills

Self-assessed, then rounded down.

Languages

Portuguese
Native
English
C1
Spanish Portunhol
Fair-ready Good enough to explain a gripper at a trade fair. Grammar not guaranteed.
German
A2, owl-certified Daily lessons from a green owl. Score 34 and counting.
French
Survival Fluent in secondary school. It has been a while.
Patentese
Scroll to assess The language of my people. My people being inventors trying to talk to attorneys.

Patents

Where the Patentese came from. Each patent below, with a translation and a drawing.

  1. 2026

    Self-sensing flexible gripper finger with asymmetric conformable contact architecture and robotic gripper comprising the same

    Translation: a soft finger that feels what it grabs.

    Provisional patent application, 2026

  2. 2026

    Input device obtained by additive manufacturing, process for producing it by additive manufacturing, and related use

    Translation: a printed joystick. The arcade's grandparent.

    Portuguese patent application 120023, published August 2026

  3. 2026

    Resistive sensor for frost detection, measurement system, manufacturing process and related uses

    Translation: the PhD sensor, but 3D printed.

    Portuguese patent application 119851, published May 2026

  4. 2026

    Self-sensing soft gripper finger comprising electrically conductive polymers, production process and use thereof

    Translation: the birth of SensiFlex.

    Portuguese patent application 119846, published May 2026

  5. 2020

    Resistive sensor for frost detection

    Translation: the PhD sensor, version one.

    Portuguese patent 116073, INPI

  6. 2018

    Device for producing filament and respective operating method

    Translation: PET bottles in, PET filament out. From my MSc.

    European patent EP3603932, expired

The drawings stay in the drawer
until the application is published.
Figure 1A of PT 120023: the printed sensor, a central core with four arms

Fig. 1A, PT 120023

1
Central core
2
Conductive layer, printed first
3
Arms, one per direction
4
Electrical connection holes
5
Holes for the joystick lever
6
Ball bearing, the pivot
Figures 1 and 2 of PT 119851: the printed frost sensor from above and from the side

Figs. 1 and 2, PT 119851

1
Resistive sensor
10
Base layer, insulating elastomer
11
Printed electrode layer
11a
First electrode
11b
Second electrode
12
Interdigital gap, where the frost goes
13
Cable hole
14
Fixing hole, to the evaporator fins
Figure 2 of PT 119846: two self-sensing soft fingers side by side

Fig. 2, PT 119846

1
Self-sensing finger
2
Mounting zone
3
Cross bars
4
Back
10
Contact surface, conductive
11
Conduction circuit
12
Independent sensing circuits
Figure 1 of PT 116073: the sensor body, its electrodes, the porous material between them and the terminals

Fig. 1, PT 116073

1
Sensor body
2
Electrodes
3
Porous insulating material between the electrodes
4
Terminals to the controller
Figure 1 of EP3603932: the filament-making device, from hopper to spool

Fig. 1, EP 3603932

1
Motor
2
Axial bearing
3
Vacuum pump
4
Hopper
5
Barrel
6
Heaters
7
Degassing zone
8
Die
9
Cooling tray
10
Diameter gauge
11
Puller
12
Water circulation

Awards

Nine awards so far, seven of them won as a team. Most came from the same habit: making something new out of what was already on the table. Orange peel, farm by-products, conductive plastic.

2026
1st place · INOVC+ ignition projects and proofs of concept

SensiFlex AX, a new finger architecture for the self-sensing gripper.

2026
1st place · Seed Tech Transfer

SensiFlex, self-sensing soft robotic gripper.

2026
1st place · StartUp Capital Summit

SensiFlex, self-sensing soft gripper.

2026
2nd place · INOVC+ ignition projects and proofs of concept

AirShield, air disinfection combining UV and plasma.

2026
Honourable mention · Arrisca C

SensiFlex, self-sensing soft gripper.

2023
1st place · RE-START circular business plan competition

ZestPack, packaging made from orange peel.

2023
2nd place · WIN-UBI business idea contest

Orange-peel packaging material.

2023
1st place · S4agro innovation contest

Snack packaging made from orange peel.

2023
1st place · S4agro innovation contest

An autonomous system for monitoring insects.

Research and teaching

Short version. 4 book chapters, 17 journal articles, 17 conference papers, h-index 10 (Scopus), and 15 MSc dissertations supervised. The full list lives on ORCID.

Selected publications

MSc dissertations supervised

Most in Portuguese, all at UBI. Most have a second supervisor. The newest are still being written.

Teaching

  • Robotics · UBI, since 2017
  • Industrial automation · UBI, 2022–2025
  • Introduction to electromechanical project · UBI, 2022–2026
  • Refrigeration systems · UBI, 2025–2026
  • Additive manufacturing course · UBI, set up and taught all five editions
  • Robotics, maintenance, CIM · AFTEBI school of technology, 2018–2022

Talks and outreach

Mostly explaining printed sensors and soft grippers to anyone who will stand still long enough. The Formnext talks are on video.

Martim presenting the self-sensing gripper on the Formnext TV stage, pointing at test results
Formnext 2025. Watch the talk.
Martim speaking at a podium at F!Next Indústria Tech+AI
F!Next Indústria Tech+AI: SensiFlex, soft self-sensing robotic grippers made by additive manufacturing.
Martim explaining the SensiFlex gripper to visitors at the F!Next Indústria Tech+AI fair
Explaining SensiFlex at the F!Next Indústria Tech+AI fair.

Beyond work

Sculpture

My father welding the steel miner in the workshop: sparks, scaffolding and two giant steel boots
In the workshop: the boots, and my father welding.
The finished steel miner at night on a pile of rocks, lamp raised, a giant pickaxe at his feet
In place, lamp up.

My father is a sculptor, and I grew up in his studio. That is where I learnt the engineering of art and the art of engineering.

After my MSc I took a year to help him build a large steel sculpture of a miner. He was the sculptor; I was the assistant.

In case you like awesome sculpture.
aurelianoaguiar.com

Photography

Night skies, fire, water, and once, flowers made of litter. I picked up rubbish in the wild, turned it into flowers, photographed them, and then binned the lot.

See the gallery
Steel-wool light painting inside a stone tunnel at night A blue flower made of plastic litter, among heather Silhouette on a ridge at sunrise, breath visible in the cold

I know how to suffer

Useful in long runs and in long projects.

  • Trail da Cereja, 202635 km, 2100 m up, 7 h 33
  • Half marathon, 202621 km in 2 h 05
  • Trail dos Descobrimentos, Belmonte, 202614 km, 550 m up
  • Trail da Cereja, 202518 km, 1000 m up
  • PhD in Mechanical Engineeringthe longest one

Let's build
something

Got a problem that needs a prototype? Tell me about it.

For now, the quickest way to reach me is a message on LinkedIn.